Research Areas

• Industrial waste Utilization by mix proportioning of Fly ash based Geopolymer Concrete without cement
• Ferrocement Technology for construction of water storage check dams in rural area and low cost housing
• Fiber reinforced concrete to enhance tensile strength and elastic properties of concrete
• Impact of nearby Industry on soil and ground water quality and remedial Technology.
• Development of Performance model of natural coagulants in domestic water treatment and optimization of coagulant process.
• Development of mathematical modeling of water shade coupled Infiltration using soft computing tools
• Mathematical modeling and calculation of behavioral characteristics of Composite structures used in construction

Grant Received from AICTE

Patents Filed/Obtained

Consultancy Projects Undertaken

Publications

2019-20

A] List of Publications in SCI Journals

• Sayyad A. S. and Ghugal Y. M. “Analytical solutions for the flexure analysis of advanced composite arches” International Journal of Bridge Engineering, Vol. 8(1), 2020, pp. 53-70.
• Sayyad A. S. and Ghugal Y. M. “ On the buckling of advanced composite sandwich rectangular plates” Journal of Sandwich Structures and Materials, Vol. 0(0), 2020, pp. 1-30.
• Sayyad A. S. and Ghugal Y. M. “ Stress analysis of laminated composite and sandwich cylindrical shells using a generalized shell theory”. Composite Materials and Engineering, 2020, Vol. 2 (2), pp. 103-124.
• Sayyad A. S. and Ghugal Y. M. “ Bending, buckling and free vibration analysis of size dependent nanoscale FG beams using refined models and Eringen’s nonlocal theory”. International Jof Applied Mechanics, 2020, Vol. 12 (1), pp.1-34.
• Naik N. S. and Sayyad A. S. “ Analysis of laminated plates subjected to mechanical and hygrothermal environmental loads using fifth-order shear and normal deformation theory”, International Journal of Applied Mechanics, Vol. 12(3),2020, pp. 1-51.
• Shind B. M. and Sayyad A. S. “ Analysis of laminated and sandwich spherical shells using new higher-order theory” Advances in Aircraft and Spacecraft Science, Vol.7(1), 2020, pp.19-40.
• Avhad P. V. and Sayyad A. S. “Static analysis of functionally graded composite beams curved in elevation using higher-order shear and normal deformation theory” Materials Today: Proceeding, Vol.21, 2020, pp. 1195-1199.
• Naik N. S. and Sayyad A. S. “ 1-D Thermal analysis of laminated composite and sandwich plates using a new fifth-order shear and normal deformation theory” Materials Today: Proceeding, Vol.21, 2020, pp.1084-1088.
• M. Ghumare and Sayyad A. S. “ Analytical solution using fifth-order shear and normal deformation theory for FG plates resting on elastic foundation subjected to hygro-thermo-mechanical load” Materials Today: Proceeding, Vol.21, 2020, pp.1089-1093.
• Shinde B. M. and Sayyad A. S. “Static deformation of orthotropic spherical shell using fifth-order shear and normal deformation theory” Materials Today: Proceeding, Vol.21, 2020, pp.1123-1127.
• Sayyad A. S. and Shaikh A. S. “Estimation of deflections in cantilever and fixed castellated beams with hexagonal, square and circular opening” TECNICA ITALIANA- Ittalian Journal of Engineering Science , Vol.64(1), 2020, pp. 118-127.
• M. Ghumare and Sayyad A. S. “ Analysis of functionally graded plates resting on elastic foundation and subjected to non-linear hygor-thermo-mechanical loading” JMST Advances, Vol.1, 2019, pp.233-248.
• M. Ghumare and Sayyad A. S. “ Analytical solution for the hygro-thermo-mechanical bending of FG beams using a new fifth order shear and normal deformation theory” Applied and Computational Mechanics, Vol.14, 2020, pp.1-26.
• Korke S.R. and Jadhao P.D. “Chormium and copper removal from aqueous solution by using natural adsorbent” Indian J Environmental Protection, Vol. 40(5), 2020, pp. 501-506.
• Naik N.S. and Sayyad A. S. “Higher order displacement model for cylindrical bending of laminated and sandwich plates subjected to environmental loads” Mechanics of Advanced Composite Structures (Accepted)
• Shinde B.M. and Sayyad A S “Thermoelastic analysis of laminated composite and sandwich shells considering the effects of transverse shear and normal deformations” Journal of Thermal Stresses (Accepted)
• Paithankar D.N. and Taji S.G “Investigating the hydrological performance of green roofs using storm water management model” Materials Today:Proceedings (Accepted)
• Jadhav M.V. and Kulkarni M.M. “ Performance evaluation of natural coagulant for removal of turbidity and optimisation of coagulation process” Int J Environmental Engineering (Accepted)
• Sasane V.V. “ Modelling nitrate contamination in groundwater using artificial neural network combined with principal component analysis in nashik”. Indian J of Environmental Protection, 2020, Vol. 40(7), pp. 675-684.

 B] List of Publications in Conference Proceedings

• Shinde B.M. and Sayyad A.S., “Free vibration analysis of laminated composite spherical shells- an analytical approach” 7^th Nirma University International conference on Engineering on 21-22 Nov 2019 (NUiCONE -2019)
• Sasane V.V. “ Least square support vector machine in prediction of lead” 24^th HYDRO-2019 International Conference on 18-20 Dec 2019.
• Gunjal S.M. “ Utilization of waste marble powder for the production of limestone calcinated clay cement” 3^rd International confrrence on Innovative Technologies for clean and sustainable development on 19-21 Feb 2020 (ITCSD2020)
• Gunjal S.M. “Study on fresh and harden properties of limestone calcinated clay cement (LC³) production by marble stone powder” 3^rd International conference on calcinated clays for sustainable concrete on 15-17 Oct 2019.
• Paithankar D.N. and Taji S.G “Investigating the hydrological performance of green roofs using storm water management model” 3^rd International conference on calcinated clays for sustainable concrete on 15-17 Oct 2019.

C] List of Publications in Book Chapter

• G.Taji “Smart rain water harvesting for smart cities” in the edited book Security and Privacy Applications for Smart City Development , Springer Series. , Chapter 6, pp. 1-32.
• Gunjal S.M. “Study on fresh and harden properties of limestone calcinated clay cement (LC³) production by marble stone powder” Calcinated clays for sustainable concrete, RILEM Bookseries 25 , ISBN 978-981-15-2806-4, pp. 535-543.

 2018-19

A] List of Publications in SCI Journals

• Sayyad A.S. “Static and free vibration analysis of laminated composite and sandwich spherical shells using a generalized higher-order shell theory” Composite Structure, Vol. 219, pp. 129-146, 2019. Impact Factor: 4.101.
• Sayyad A.S. “A sinusoidal beam theory for functionally graded sandwich curved beams” Composite Structure, Vol. 226, pp. 111246, 2019. Impact Factor: 4.101.
• Sayyad A.S. and Naik N.S. “New displacement model for accurate prediction of transverse shear stresses in laminated and sandwich rectangular plates” ASCE Journal of Aerospace Engineering, Vol. 32(5), pp. 1-28, 2019.
• Sayyad A. S. “A unified a 5 degree of freedom theory for the bending analysis of softcore and hardcore functionally graded sandwich beams and plates” Journal of Sandwich Structures & Materials, pp.1-34, 2019. DOI: 10.1177/1099636219840980. Impact Factor: 0.836.
• Sayyad A. S. “Modeling and analysis of functionally graded sandwich beams: a review” Mechanics of Advanced Materials and Structures, Vol. 26(21), pp.1776-1795, 2019.
• Sayyad A. S. and Nikam R.D. “A unified nonlocal formulation for bending, buckling and free vibration analysis of nanobeams” Mechanics of Advanced Materials and Structures, Taylor and Francis, pp.1-10, DOI: 10.1080/15376494.2018.1495794. 2018.
• Ghumare S. M. and Sayyad A.S. “Non-linear hygro-thermo-mechanical analysis of functionally graded plates using a fifth order plate theory” Arabian Journal of Science and Engineering, Springer, Vol.44, pp. 8727-8745, 2019. DOI: https://doi.org/10.1007/s13369-019-0389.
• Sayyad A. S. and Avhad P. “On the static bending, buckling and free vibration analysis of symmetric functionally graded sandwich beams” Journal of Solid Mechanics, Vol.11 (1), pp.166-180, 2019.
• N. S. and Sayyad A. S. “An accurate computational model for thermal analysis of laminated composite and sandwich plates.” Journal of Thermal Stresses, Taylor and Francis, Vol. 42 (5), pp.559-579, 2018.
• Sayyad A.S., Ghugal Y.M, “Effects of nonlinear hygro-thermo-mechanical loading on bending of FGM rectangular plates resting on two-parameter elastic foundation using four-unknown plate theory” Journal of Thermal Stresses, Vol. 42 (2), pp. 213-232, 2019.

DOI: https://doi.org/10.1080/01495739.2018.1469962.

• Sayyad A. S. Ghugal Y.M, “Bending of shear deformable plates resting on Winkler foundations according to trigonometric plate theory” Journal of Applied Computational Mechanics, Vol.4 (3), 187-201, 2018.
• N. S. and Sayyad A. S. “2D analysis of laminated composite and sandwich plates using new fifth order theory.” Latin American Journal of Solids and Structure, Vol 15 (9), pp.114-125, 2018.
• Sayyad A. S., Ghugal Y.M, “An inverse hyperbolic theory for FG beams resting on Winkler-Pasternak elastic foundation” Advances in Aircraft and Spacecraft Science, Vol.5 (6), pp. 671-689, 2018.
• Ghumare S. M. and Sayyad A.S. “A new quasi-3D model for functionally graded plates” Journal of Applied and Computational Mechanics, Vol.5 (2), pp. 367-380, 2019.
• Sasane V.V., “Review of water quality issues of Godavari river basin and prediction models” EM International, Vol. 37 (3), pp. 161-168, 2018.

B] List of Publications in Conference Proceedings

• N. S., Sayyad A.S., “1D Thermal Analysis of Laminated Composite and Sandwich Plates using a new fifth order shear and normal deformation theory.” 6^th International Conference on recent advances in composite materials. (IRACM-2019)
• Ghumare S. M., Sayyad A.S. “Analytical solution using fifth order shear and normal deformation theory for FG plates resting on elastic foundation subjected to hygro-thermo-mechanical loading.” 6^th International Conference on recent advances in composite materials. (IRACM-2019)
• Shinde B.M. , Sayyad A.S. “Analytical solution using fifth order shear and normal deformation theory for FG plates resting on elastic foundation subjected to hygro-thermo-mechanical loading.” 6^th International Conference on recent advances in composite materials. (IRACM-2019)

2017-18

A] List of Publications in SCI Journals

• Sayyad A. S., Ghugal Y.M., “A unified shear deformation theory for the bending of isotropic, functionally graded, laminated and sandwich beams and plates”. International Journal of Applied Mechanics, Vol. 9, Issue. 1. pp.1-36, 2017.
• Sayyad A. S., Ghugal Y.M., “Bending, buckling and free vibration of laminated composite and sandwich beams: A critical review of literature”. Composite Structures, Vol. 171, pp.486-504, 2017.
• Sayyad A. S., Ghugal Y.M, “Effect of thickness stretching on the static deformations, natural frequencies, and critical buckling loads of laminated composite and sandwich beams” Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol.40, 296, pp. 1-16, 2018. Impact Factor: 1.627.
• Sayyad A. S., Ghugal Y.M., “Analytical solutions for bending, buckling, and vibration analyses of exponential functionally graded higher order beams” Asian Journal of Civil Engineering, Vol.5, pp.1-17, 2018.
• Sayyad A. S. “Bending, buckling and free vibration responses of hyperbolic shear deformable FGM beams” Mechanics of Advanced Composite Structures, Vol.5, pp. 13–24, 2018.
• Naik N.S., Sayyad .A.S “1 D analysis of laminated composite and sandwich plates using new Fifth-Order shear and normal deformation theory ” Latin American Journal of Solids and Structures.Vol 15, 2018.
• Ghumare S.M., Sayyad A.S., “A new fifth-order shear and normal deformation theory for static bending and elastic buckling of P-FGM beams.” Latin American Journal of Solids and Structures, Vol.14, pp.1893-1911, 2017.
• Shinde B.M., Sayyad A.S. “A Quasi- 3D Polynomial shear and normal deformation theory for laminated composite, sandwich and functionally graded beams”, Mechanics of Adv. Composite structure, Vol.4, pp.139-152, 2017.
• Shinde P.N., Patankar S.V., Sayyad A.S., “Investigation on effect of fineness of fly ash and alkaline ratio on mechanical properties of Geoploymer concrete”. Research on Engineering structures and Materials, Vol.4 (1), pp.61-71, 2018.
• Patankar S.V., Jamkar S.S., More D.D., “Effect of concentration of alkaline solutions on the development of geopolymer mortar” International Journal of Engineering Technology, Management and Applied Science, Vol. 5 (1), pp. 114-123, 2017.
• Manjunath B. “Examining the travel time reliability under mix traffic conditions; A case study of Urban roads in Indian cities” Asian Transport studies Journal, Vol.5 (1), pp.30-46, 2018. ISSN 2185-5560.
• Manjunath B. “Capacity estimation of national highway-50” World Journal of Technology, Engineering and Research, 2018, Vol.4 (1), pp.53-62, 2018.
• Hiremath S. “Variation of Consistency Limits of Black Cotton Soil Treated With Flyash, Lime and Alkalis” World Journal of Technology, Engineering and Research, Vol. 4 (1), pp. 85-90, 2018.
• Birader H. “Ten Storied RC Building Seismic Assessment with User Defined Hinges”. World Journal of Technology, Engineering and Research, Vol. 3 (1), pp. 407-414, 2018.
• Sasane V.V. “Bio-CNG production potential from locally avaible biomass”. International Journal of Advance Resesrch, Ideas and Innovations in Technology, Vol.4 (2), pp. 1393-1399, 2018.

B] List of Publications in Conference Proceedings

• Taji S.G., “GIS based design of drainage system using SWMM for Aurangabad city Maharashtra, 22^nd International conference on hydraulics, water resources and coastal engineering , Ahemedabad (HYDRO-2017), 2017.
• Naik N.S., Sayyad A.S., “2D analysis of composite laminates using fifth-order shear and normal deformation theory”, Advances in concrete, structural and Geotechnical Engineering (ACSGE 2018), International Conference at Bits Pilani, 2018.
• Ghumare S.M.., Sayyad A.S., “Bending of FGM plates using fifth order shear and normal deformation theory”, Advances in concrete, structural and Geotechnical Engineering (ACSGE 2018), International Conference at Bits Pilani, 2018.
• Shinde B.M.., Sayyad A.S., “Bending of FGM plates using four variable shear deformation theory”, Advances in concrete, structural and Geotechnical Engineering (ACSGE 2018), International Conference at Bits Pilani, 2018.
• Patankar S.V., “Effect of water to binder ratio on the development of fly ash based geo-polymer concrete,” Advances in concrete, structural and Geotechnical Engineering (ACSGE 2018), International Conference at Bits Pilani, 2018.
• Gayake S.B., “Experimental validation and correlation of compressible strength for stained concrete subjected to delays in casting,” Advances in concrete, structural and Geotechnical Engineering (ACSGE 2018), International Conference at Bits Pilani, 2018.
• Patare S.A., “Free vibration analysis of hybrid photoelectric functionally graded plates,” Advances in concrete, structural and Geotechnical Engineering (ACSGE 2018), International Conference at Bits Pilani, 2018.

C] List of Scientific/Technical Books written by Faculty (Book Chapter)

• Naik N.S., Sayyad A.S., “2D analysis of composite laminates using fifth-order shear and normal deformation theory”, Advances in concrete, structural and Geotechnical Engineering (ACSGE 2018), Bloomsburry Publications, pp. 437-441, 2018.
• Ghumare S.M.., Sayyad A.S., “Bending of FGM plates using fifth order shear and normal deformation theory”, Advances in concrete, structural and Geotechnical Engineering (ACSGE 2018), Bloomsburry Publications, pp. 229-233, 2018.
• Shinde B.M.., Sayyad A.S., “Bending of FGM plates using four variable shear deformation theory”, Advances in concrete, structural and Geotechnical Engineering (ACSGE 2018), Bloomsburry Publications , pp. 145-150, 2018.
• Patankar S.V., “Effect of water to binder ratio on the development of fly ash based geo-polymer concrete,” Advances in concrete, structural and Geotechnical Engineering (ACSGE 2018), Bloomsburry Publications, pp. 739-745, 2018.
• Gayake S.B., “Experimental validation and correlation of compressible strength for stained concrete subjected to delays in casting,” Advances in concrete, structural and Geotechnical Engineering (ACSGE 2018), Bloomsburry Publications, pp. 755-760, 2018.
• Patare S.A., “Free vibration analysis of hybrid photoelectric functionally graded plates,” Advances in concrete, structural and Geotechnical Engineering (ACSGE 2018), Bloomsburry Publications, pp. 458-464, 2018.

2016-17

A] List of Publications in SCI Journals

• Sayyad A.S., Ghugal Y.M., “Cylindrical bending of multi-layered composite laminates and sandwiches”. Advances in Aircraft and Spacecraft Sciences, Vol. 3(2), pp. 113-148, 2016. DOI: http://dx.doi.org/10.12989/aas.2016.3.2.113,
• Sayyad A.S., Ghugal Y.M., “Bending, Vibration and buckling of laminated composite plates using a simple four variable plate theory”. Latin American Journal of Solids and Structures, Vol. 13 (3), pp. 516-535, 2016. Impact Factor: 1.411
• Sayyad A.S., Ghugal Y.M., “Single variable refined beam theories for the bending, buckling and free vibration of homogenous beams”, Applied and Computational Mechanics, Vol. 10 (2), pp. 123-138, 2017.
• Sayyad A.S., Ghugal Y.M., Shinde B.M., “Thermal stress analysis of laminated composite plates using exponential shear deformation theory”, International Journal of Automotive Composite, Vol. 2 (1), pp. 23-40, 2017.
• Sayyad A.S., Ghugal Y.M., “On the free vibration of angle-ply laminated composite and soft core sandwich plates”. Journal of Sandwich Structures and Materials, Vol. 19 (6), pp. 679-711. Impact Factor: 2.852, DOI: 10.1177/1099636216639000, 2017.
• Deshpande A.V. “Assessment of groundwater quality by using statistical analysis from Kopargaon Taluka, Ahmednagar, India” International Journal of Advanced Geosciences, Volume-4(2), 2016, pp.15-20
• Das S. “Vibration based damage detection techniques used for health monitoring of structures: A review” Journal of Civil Structural health monitoring, Vol. 6 (3), pp. 477-507. 2016. DOI 10.1007/s13349-016-0168-5.
• Wagh H.N. “Study of effect of agitation by MFC” International journal of Advanced Research in Science and Engineering, Vol-06, Issue 03, 2017.
• Kolhe R.V. “Earned Value Analysis of a Flyover Constrction Projests” Journal of Consruction Engineering and Management. 2017.

B] List of Publications in Conference Proceedings

• Das S., “Damage identification in a multi-storeyed building using modal based health monitoring techniques”, Structural Engineering Convection (SEC-2016), at IIT Guwahati.
• Patankar S.V., “Effect of concentration of alkaline solution in the development of geopolymer concrete”, 2^nd International conference on Engineering Technology, Science and Management Innovations, (ICETSIMI-2017) at NIITTR Chandigarh, 2017.
• More D.D., “Suitability of Bacillius Pasteurii bacteria in cement concrete”, Proceedings of the international conference on Advances in Civil and Environmental Engineering, 2017.
• Gayake S.B., “Variation of strength in stained concrete, CTMC-2016”, International conference on Advances in concrete Tech, 2016.
• Kolapkar S.S., “Flexural behaviour in cellular lightweight concrete (CLC), International conference on Engineering Research, 2016.
• Kolhe R.V., “Scheduling and monitoring flyover construction project”, International conference on Advances in civil infrastructure and development of smart cities, (ICACIDS- 2016), Sangali, 2016.

2015-16

A] List of Publications in SCI Journals

• Sayyad A.S., Ghugal Y.M., Naik N.S., “Bending analysis of laminated composite and sandwich beams according to refined trigonometric beam theory”, Curved and Layered Structures, Vol. 2(1), pp. 279-289, 2015.
• Sayyad A.S., Ghugal Y.M., “A four-variable plate theory for thermoelastic bending analysis of laminated composite plates”, Journal of Thermal Stress, Vol. 38 (8), pp. 904-925, 2015.
• Sayyad A.S., Ghugal Y.M., “A N^th order shear deformation theory for composite laminates in cylindrical bending”, Curved and Layered Structures, Vol. 2 (1), pp. 290-300, 2015.
• Sayyad A. S. and Ghugal Y. M. “On the free vibration analysis of laminated composite and sandwich plates: A review of recent literature with some numerical results.” Composite Structures, Vol. 129, pp. 177-201, 2015. Elsevier, Impact Factor: 3.858.
• Sayyad A.S., Shinde B.M. and Ghugal Y.M. “Thermo-elastic Bending Analysis of Laminated Composite Plates According to Various Shear Deformation Theories.” Open Engineering (formerly Central European Journal of Engineering) Vol. 5 (1), pp. 18-30, 2015.
• Sayyad A.S., Ghugal Y.M., Shinde P.N. “Stress analysis of laminated composite and soft core sandwich beams using a simple higher order shear deformation theory,” Journal of the Serbian Society for Computational Mechanics. Vol. 9 (1), pp. 15-35, 2015.
• Sayyad A. S., Ghugal Y. M. “Static Flexure of Soft Core Sandwich Beams using Trigonometric Shear Deformation Theory,” Mechanics of Advanced Composite Structures. Vol. 2, pp. 45-53, 2015.
• Sayyad A. S. Shinde B. M. and Ghumare S. M., “A refined shear deformation theory for bending analysis of isotropic and orthotropic plates under various loading conditions,” Journal of Materials and Engineering Structures, vol.2, pp. 3-15, 2015.
• Sayyad A. S., Ghumare S. M., B. M. Shinde and Naik N. S. , “Cylindrical bending of laminated composite plates using refined shear deformation theory”, Journal of Applied and Experimental Mechanics, Vol.1 (1), pp. 10-17, 2015.
• Patankar S.V., Ghugal Y.M., Jamkar S.S., “Mix design of fly ash based geopolymer concrete”, Advances in structural engineering, Vol.1, pp. 1619-1634, 2015.
• Jadhav M.V., “Performance of natural coagulants for improving filtrate quality of synthetic turbid water prepared from local clay”, Journal of water resources and environment engineering, Vol. 1 (1), pp. 38-52, 2015.
• Jadhav M.V., “Optimization of coagulation process for turbid water with chitosan as anatural coagulant using response surface method”, Journal of water resourse and environmental engineering, vol. 1 (1), pp. 53-64, 2015.
• Purkar M.S., “Finite element analysis of a concrete –rigid wall retaining a reinforced backfill”, International journal of Geo-Engineering, Vil. 6(1), pp. 1-14, 2015.
• Shinde B.M., Sayyad A.S., “A refined shear deformation theory for bending analysis of isotropic and orthotropic plates under various loading conditions”, Journal of Materials and Engineering Structures, Vol. 2, pp. 3-15, 2015.
• Ghumare S.M., Sayyad A.S., “Cylindrical Bending of laminated composite plates using refined shear deformation theory”, Journal of Materials and Engineering Structures, Vol. 1 (1), pp. 10-17, 2015.
• Gunjal S.M., “Buckling analysis of thick plates using refined trigonometric shear deformation theory”, Journal of Materials and Engineering Structures, Vol. 2 (4), pp. 159-167, 2015.
• Jejurkar C.L., “An investigation approach for the modelling of infiltration process in a clay soil”, KSCE Journal of Civil Engineering, Vol. 19 (6), pp. 1916-1921, 2015.
• Gunjal S.M., “Free vibration analysis of rectangular plates using two variable trigonometric shear deformation theory”, Journal of Experimental and Applied Mechanics, Vol. 6(3), pp. 58-64, 2015.
• Paithankar D.N., “Removal of Heavy Metals from Synthetic Wastewater Using Peanut Husk Charcol, Fly Ash and Zeolite as Adsorbents”, International Journal of Modern Trends in Engineering and Research, 20 (20),pp.1-10, 2015.
• Sasane V.V., “A potential of Phytodisinfectants in water treatment in Rural India: A review”, Journal of water resources and environment engineering, Vol. 1 (1), pp. 10-24, 2015.
• Sasane V.V., “Assessment of groundwater quality using WQI for selected rural area of Kopargaon, Ahmednagar, Maharashtra”, Journal of Environmental Science and Engineering, Vol. 57 (10), pp. 7-15, 2015.
• Sarangdhar G.N., “Kinetics of water disinfection with Azadirachtra Indica (Neem) leaf powder”, Journal of water resources and environment engineering, Vol. 1 (1), pp. 25-30, 2015.
• Patare B.R., “A new trigonometric shear deformation theory for functionally graded plates”, Journal of structural analysis, Vol. 1 (1), 1-8.
• Naik N.S., “Behavior of brick masonry prism with wire mesh confinement under compression”, Journal of Concrete Technology, Vol. 1 (1), pp. 6-13, 2015.

2014-15

A] List of Publications in SCI Journals

• Sayyad A. S., Ghugal Y. M., “On the Buckling of Isotropic, Transversely Isotropic and Laminated Composite Rectangular Plates,” International Journal of Structural Stability and Dynamics. Vol. 14 (6), pp. 1-32, 2014.World Scientific, Impact Factor: 1.617.
• Sayyad A. S., Ghugal Y. M. “Buckling and Free Vibration Analysis of Orthotropic Plates by using Exponential Shear Deformation Theory” Latin American Journal of Solids and Structures, Vol.11 (8), pp. 1298-1314, 2014. Impact Factor: 1.411
• Sayyad A. S., Ghugal Y. M. “Flexure of Cross-ply Laminated Plates using Equivalent Single Layer Trigonometric Shear Deformation Theory,” Structural Engineering and Mechanics, An International Journal, Vol. 51 (5), pp. 867-891, 2014. Techno Press Impact Factor: 1.118.
• Sayyad A. S. and Ghugal Y. M. “A New Shear and Normal Deformation Theory for Isotropic, Transversely Isotropic, Laminated Composite and Sandwich Plates” International Journal of Mechanics and Materials in Design. Vol. 10 (3), pp. 247-267, 2014. Springer, Impact Factor: 2.102.
• Sayyad A. S., Ghugal Y. M., R. Borkar “Flexural Analysis of Fibrous Composite Beams under Various Mechanical Loadings using Refined Shear Deformation Theories” Composites: Mechanics, Computations Applications. An International Journal, Vol. 5 (1), pp. 1-19, 2014.
• Sayyad A. S., Ghumare S.M., Sasane S.T. “Cylindrical bending of orthotropic plate strip based on nth-order plate theory” Journal of Materials and Engineering Structures, Vol. 1, pp. 47–57, 2014.
• Patankar S.V., “Effect of concentration of sodium hydroxide and degree of heat curing on fly ash based Geopolymer mortar”, Indian Journal of Material Science, Vol. 1, pp. 1-6, 2014.
• Naik N.S., “Strength and durability of fly ash, cement and gypsum bricks”, International journal of computational engineering research, Vol. 4 (5), pp. 1-4, 2014.
• Patankar S.V., “Effect of grading of fine aggregate on flow and compressive strength of geopolymer concrete”, UKEIRI Concrete congress innovations in concrete, Vol. 1, pp. 1163-1172, 2014.
• Jadhav M.V. “Application of response surface methodology to water/wastewater treatment using coccinia indica”, Desalination and water treatment, Vol. 52, pp. 6403-6411, 2014.
• Jadhav M.V. “Assessment of feasibility of natural coagulants in turbidity removal and modeling of coagulation process”, Desalination and water treatment, Vol. 52, pp. 5812-5821, 2014.
• Jadhav A.S. “Use of maize husk fly ash as a adsorbent for removal of fluoride from water”, International Journal of recent development in engineering and technology, Vol. 2 (2), pp. 41-46, 2014.
• Ghodale M.D. “Invetigation of optimum operating parameters for BOD and COD removal using activated carbon”, International journal of development in engineering and technology, Vol. 2 (4), pp. 38-43, 2014.

B] List of Publications in Conference Proceedings

• Patankar S.V. “Selection of suitable quantity of water and duration of heat curing for geopolymer concrete production”, Proceedings of 3^rd international conference on recent trends in engineering, 2014.